Design Plan Trixie

Features:

3.15" x 4.5" square die cast surface mount LED fixture
CSA listed wet label
Rated IP65, IK08
3.5w LED's in warm white or cool white
Remote 24V DC power supply
Complies with LM79 and LM80

Manufacturer: Design Plan

Applications: Facade Lighting, Hallway, LED -> Other, Lobby, Office -> Hallways, Wall Mounted Exterior

Documents:

Spec Sheet (54 KB pdf file)
Brochure (173 KB pdf file)

Related Links:

For Additional Product Information

Report a broken link

Design Tips

Facade Lighting (Acuity Brands)
When lighting building facades with ground-mounted floodlights, three factors are considered:
Setback

The recommended setback is 3/4 times the building height. If a building is 30 feet tall, the recommended setback is 22.5 feet from the building. Locating the floodlight closer to the building will sacrifice uniformity; setting it farther back will result in loss of efficiency.
Spacing

The rule of thumb for spacing floodlights is not to exceed two times the setback distance. If the setback is 22.5 feet, the floodlights should not be placed more than 45 feet apart.
Aiming

The floodlight should be aimed at least 2/3 the height of the building. For example, if a building is 30 feet high, the recommended aiming point is approximately 20 feet high. After installation is complete, aiming can be adjusted to produce the best appearance. Mounting a full or upper visor to the floodlight can reduce unwanted spill light.

For more details click this link